Materials (10 tests/kit)
1) Test -------------------------------------------------------------------------------------------- 10 units
2) Diluent (buffer) ------------------------------------------------------------------- 0.4 x 10 units
3) Disposable dropper -------------------------------------------------------------------------- 10 units
4) Swabs for sample collection --------------------------------------------------------------- 10 units

Uses
1) Specimen
 serum/whole blood/plasma.

2) Storage of specimen
a) Store specimen at 2~8°C for use within 24 hours or at -25°C for later use.
b) Keep the specimen at 22~25°C before use.

3) Test procedure
a)  Collect canine ocular or nasal discharge with a swab and put the swab into a sample tube containing 0.4 of buffer.
b) Swirl the buffer with the swab.
c) Drop 4 drops (100  ) into the specimen well.
d) Read the test results within 5 – 10 minutes.
e) Invalid result after 10 minutes

4) Interpretation of the results
A purple band should appear on the control line regardless of the test result. The presence of another band on the test line determines the result.
Control Line (C): The line should always appear regardless of the presence of the antigens of canine adenovirus. If this line does not appear, the test should be considered invalid. This is might be because of impure buffer or the lack of specimen. It should be tested again with another kit.
Test Line (T):
1) Negative: Control line only appears.
2) Positive: Both Test and Control lines appear.
3) Retesting
a) Both Test and Control lines do not appear.
b) Test line only appears

5) Further examinations
This test is for primary screening only. Consult veterinarians for further necessary
examinations to obtain clinical test results.